16V Lithium Batteries for Boat Electronics: How They Work and When to Use One
Short answer: A 16V lithium battery is a LiFePO4 battery with a 16V nominal voltage instead of 12.8V. It's designed to power marine electronics, such as fish finders and sonar, whose manufacturer-rated input range goes above 12V. At the higher voltage, the same electronics draw less current, which reduces voltage drop in long wire runs. Only connect a 16V battery to devices rated for 16V input. Pro-Guide makes the 16VM50 (16V, 50Ah, 800Wh, 11.68 lb) and the 16VM160 (16V, 160Ah, 2,560Wh, Group 31 Tall). Both charge on the 12/16V 1-Bank Charger.
Running your electronics on their own battery is one of the best upgrades for clean, steady power on long days. This guide explains when a 16V battery makes sense, how to check compatibility, and how to size and charge one.
Key Takeaways
- 16V is for electronics only, and only for units whose rated input range includes 16V.
- Less current, less voltage drop: the same wattage at a higher voltage means fewer amps in the wires.
- Keep it separate: run 16V on its own dedicated electronics circuit, never tied into a 12V system.
- Two sizes: the 16VM50 for one or two units and kayaks, and the 16VM160 for big multi-screen setups.
- Charge at 16V: use a charger with a 16V lithium profile, such as the 12/16V 1-Bank.
What Is a 16V Lithium Battery?
A standard 12V LiFePO4 battery is built from four 3.2V cells in series (12.8V nominal). A 16V battery adds a fifth cell, for 16V nominal. Like any LiFePO4 battery, it can use nearly all of its rated capacity, holds a steady voltage as it discharges, and lasts thousands of cycles. The 16VM50 is rated for 3,000 cycles at 100% depth of discharge and 6,000 at 80%.
Why Run Electronics on 16V?
Power is voltage multiplied by current. A unit drawing 60 watts pulls about 4.7 amps at 12.8V but only about 3.75 amps at 16V. Less current means less voltage lost along long cable runs from the battery to the console and bow, so the electronics see a steadier supply. That only helps, of course, if the electronics are designed to accept the higher voltage.
Check Compatibility First
Pro-Guide's data sheets are clear: use a 16V battery only with marine electronics compatible with 16V inputs. Before you connect:
- Find each device's input voltage range in its manual or spec sheet. That includes the display, transducer, any sonar black box and the networking gear.
- Confirm that 16V, and a fully charged 16V battery's resting voltage, sits inside that range for every device on the circuit.
- If any device is 12V-only, keep it on a 12V battery.
Connecting a 16V battery to equipment not rated for it can damage the equipment or void its warranty.

Pro-Guide 16V Batteries
| Spec | 16VM50 | 16VM160 |
| Capacity / energy | 50Ah / 800Wh | 160Ah / 2,560Wh |
| Weight | 11.68 lb | 44.09 lb |
| Size (in) | 7 3/4 x 6 1/2 x 6 9/10 | Group 31 Tall: 13.07 x 6.93 x 10.83 |
| Max continuous discharge | 50A | 100A |
| Charge current (standard / max) | 10A / 25A | 10-32A / 80A |
| Charge voltage | 18.25V (±0.2V) | 18V cut-off |
| Protection | IP65, BMS with cell balancing | IP67, BMS, built-in heater |
| Extras | Bluetooth | Bluetooth, NMEA 2000, state of charge gauge, Pro-Boost 10% reserve |
| Warranty | 5-yr free replacement, 10-yr pro-rata | 5-yr free replacement, 10-yr pro-rata |
- 16VM50: compact and light, for one or two units, kayaks and tight consoles. At under 12 lb it is easy to carry to the dock for charging.
- 16VM160: for multi-screen bass boat and bay boat setups that run all day, with NMEA 2000 so its state of charge can show on your network. Learn more in What Is NMEA?
Both come as bundles with the 12/16V charger: the 16VM50 bundle and the 16VM160 bundle.
How Long Will It Run?
Divide amp-hours by your total electronics draw in amps:
| Electronics load | 16VM50 | 16VM160 |
| 2A (one unit) | About 25 hours | About 80 hours |
| 5A | About 10 hours | About 32 hours |
| 10A (several screens and sonar) | About 5 hours | About 16 hours |
On the 16VM160, Pro-Boost holds back 10% of capacity as a reserve, so plan on a little less before you dip into it. Real runtime depends on screen brightness, sonar use and temperature. For more on dedicated electronics batteries, read Should You Run a Separate Battery for Your Boat Electronics?
16V vs. 12V Electronics Battery
If some of your electronics are 12V-only, a 12V lithium battery is the safe, universal choice. Here's how the compact 16V and 12V options compare:
| Spec | 16VM50 (16V) | PGLM50 (12V) |
| Capacity / energy | 50Ah / 800Wh | 50Ah / 640Wh |
| Weight | 11.68 lb | 14 lb |
| Size (in) | 7 3/4 x 6 1/2 x 6 9/10 | 7 3/4 x 6 1/2 x 6 9/10 |
| Charge current (standard / max) | 10A / 25A | 10A / 50A |
| Works with | Electronics rated for 16V input only | Standard 12V electronics |
| Warranty | 5-yr free replacement, 10-yr pro-rata | 5-yr free replacement, 10-yr pro-rata |
Both share the same footprint. At the same 50Ah rating, the 16V battery stores 25% more energy (800Wh vs. 640Wh) because of its higher voltage. Read more about the 12V option in the 12V 50Ah electronics battery guide.
Example 16V Setups
Kayak or small boat with one 16V-rated unit
A 16VM50 at 11.68 lb runs a single unit drawing about 2A for roughly 25 hours, enough for several outings between charges. Pair it with the 12/16V charger through the 16VM50 bundle.
Bass boat with two screens and forward-facing sonar
Add up the draw of every device on the circuit from their manuals. At around 10A combined, a 16VM50 lasts about 5 hours, while a 16VM160 lasts about 16 hours, a full tournament day with capacity to spare. Confirm that every unit, including the sonar black box, is rated for 16V.
Mixed 12V and 16V electronics
Run two dedicated circuits: a 16V battery for the units rated for 16V, and a 12V lithium battery for anything 12V-only. Don't feed a 12V-only device from the 16V circuit. Keep the two circuits physically separate, with their own fuses and switches, so the batteries can never be connected by mistake.

Charging a 16V Lithium Battery
- Use a 16V lithium profile. A 12V charger won't fully charge a 16V battery. The Pro-Guide 12/16V 1-Bank charges 16V lithium at 18 to 18.3V and is IP68 rated for on-board use.
- Charge time: on the charger's 10A bank, the 16VM50 charges from empty in about 5 hours and the 16VM160 in about 16 hours. A typical day uses far less than a full charge.
- Wake a sleeping battery: the 12/16V charger's activation mode sends a short voltage pulse to wake a lithium battery that has gone to sleep.
- Stay plugged in: the charger is designed to stay connected year-round and checks the battery on a schedule.
For more on lithium charging, see the lithium battery charger guide.
Installation Tips
- Label the circuit clearly as 16V at the battery, the fuse block and the switch panel, so nobody connects a 12V-only device later.
- Fuse each device as its manufacturer specifies, close to the battery.
- Use the right wire size for the run length. Even at 16V, long runs to the bow lose voltage if the wire is too thin.
- Secure the battery. The 16VM50 is IP65 rated and the 16VM160 is IP67, but both still need a tray, box or hold-down. See the battery box size chart.
- Use the right terminals: M6 internal-thread terminals on the 16VM50, and three M8 internal-thread terminals on the 16VM160.
Storage and Cold Weather
- Low self-discharge: less than 2% per month for the 16VM50, and 1% to 3% per month for the 16VM160.
- Built-in heater: the 16VM160 has a built-in heater for cold-weather use. Check the data sheet for its exact charging temperature range.
- The 16VM50 has no heater, so check its charging temperature range in the manual before charging in cold weather.
- Off-season: disconnect the electronics, follow the manual's storage guidance, and if the battery goes to sleep, wake it with the charger's activation mode before the season.
Mistakes to Avoid
- Assuming every fish finder accepts 16V. Check each device's rated input range, including transducers and black boxes.
- Charging with a 12V charger. It won't reach the 18 to 18.25V a 16V battery needs.
- Tying the 16V battery into a 12V system through a shared bus, a battery switch or a parallel connection.
- Forgetting the Pro-Boost reserve on the 16VM160. Plan runtime on about 90% of capacity.
Frequently Asked Questions
What is a 16V lithium battery used for?
Powering marine electronics, such as fish finders, sonar and chartplotters, whose rated input voltage range includes 16V, usually on a dedicated electronics circuit separate from the boat's 12V system.
Can I use a 16V battery with my fish finder?
Only if every device on the circuit is rated for 16V input. Check each unit's input voltage range in its manual. Keep 12V-only devices on a 12V battery.
Why use 16V instead of 12V for electronics?
At a higher voltage, the same electronics draw less current, which means less voltage drop in long wire runs and a steadier supply to compatible units.
How long will a 16V 50Ah lithium battery last on the water?
Divide 50Ah by your load. That's about 25 hours at 2A, 10 hours at 5A and 5 hours at 10A. Actual runtime varies with screen brightness, sonar use and temperature.
Can I charge a 16V lithium battery with a 12V charger?
No. Use a charger with a 16V lithium profile, such as the Pro-Guide 12/16V 1-Bank, which charges 16V lithium at 18 to 18.3V.
Can I wire a 16V battery into my boat's 12V system?
No. Keep the 16V battery on its own circuit for compatible electronics only, and don't connect it in parallel or series with 12V batteries.
How much does a 16V lithium battery weigh?
The Pro-Guide 16VM50 weighs 11.68 lb and the 16VM160 weighs 44.09 lb, a fraction of a lead-acid battery with similar usable energy.
Can I use a 16V lithium battery for a trolling motor?
No. Pro-Guide 16V batteries are built for marine electronics rated for a 16V input. Trolling motors need a battery or bank that matches their rated 12V, 24V or 36V system.
Shop 16V Lithium
Confirm your electronics accept 16V, choose the capacity for your setup, and pair it with a 16V-capable charger.
Running a big multi-screen setup? See the 16VM160 bundle, or call our team at 1-800-827-3232 to check your electronics.
Built for the Water. Powered by Pro-Guide.
