Deep Cycle Lithium Batteries

LiFePO4 — lithium iron phosphate — is the most thermally stable lithium chemistry in common use. Compared with lead-acid it holds voltage under load far longer, weighs a fraction as much for the same usable capacity, and needs no watering or terminal maintenance.

Add up the amp draw of everything the battery has to run, multiply by the hours you want between charges, and leave some headroom. If you would rather not do the math, our team will size it with you over the phone.

Group size describes the case dimensions and terminal layout, not the capacity. Match the group size stamped on your current battery — every product page lists the group size and dimensions so you can confirm it fits the tray you already have.

Much deeper than lead-acid, which you should not take below about half its rated capacity. The BMS in a Pro-Guide lithium battery protects the cells at the bottom of the range, so far more of the rated amp hours are usable.

A lead-acid charger can undercharge a lithium pack and shorten its life. Use a lithium-compatible charger — everything in our Lithium-Compatible collection is profiled for LiFePO4.

None of the routine watering or terminal cleaning that flooded lead-acid requires. The built-in BMS manages charge and discharge protection automatically.

Terms vary by product line — the term for each battery is listed on its product page, and the full details are on our Warranty Information page. Register your battery online after purchase to activate coverage.

Call our US-based battery team on 1-800-827-3232 before you order. Tell us the machine, the tray you are working with and how long you need to run between charges, and we will point you at the right part number, or message us.